Einzelnen Beitrag anzeigen
Alt 18.10.2016, 15:39   #3 (permalink)
Freeze1337
Gast
 

Beiträge: n/a

Standard AW: Asus P5Q3 + Intel Q9550 von 2,83Ghz auf ca 3,4Ghz

Hey Tweak,

das ist mir schon klar, dass da eher keine Rennmaschine drauß wird

Ziel ist es, dass ich noch gute 600 Mhz rausbekommt also von 2,8 auf 3,4... das wär schon der Oberhammer.. habe mir jetzt mal einige guides zusammengesucht und nen anständigen CPU Kühler eingebaut, jetzt hoffe ich, dass ich heute mal auf ein grünes blatt komme

ich verwende folgende anhaltspunkte:

vcore : 1.3v in bios (1.27 idle - 1.288 load)
VTT : 1.2 oder 1.3 (ev 1.4)
MCH : 1.3 as you previously suggested fox.

und folgendes: (hier hatte der "Vorgänger" aber nur 4 GB Ram eingebaut.. ich hab 10GB, inwiefern ich da jetzt war overclocktechnisch beachten muss.. keine ahnung ^^

AI Overclock Tuner: manual
CPU Ratio Setting: 8.5
FSB Frequency: 399 402 400
PCIE Frequency: 100
FSB Strap to NB: 333 (400 = langsamer + nicht immer stabiler)
DRAM Frequency: DDR3-1596 1287 1601MHz (1600MHz bei Strap 400)
DRAM CLK Skew: Auto
DRAM Timing Control: Manual
1st Information: 7-7-7-24-.....
Cas# Latency: 7 (siehe 1st information oder Info auf RAM-Riegel)
DRAM RAS# to Cas#: 7 (siehe 1st information oder Info auf RAM-Riegel)
DRAM RAS#Precharge: 7 (siehe 1st information oder Info auf RAM-Riegel)
DRAM RAS#Activ.to Pre:24(siehe 1st information oder Info auf RAM-Riegel)
RAS# to RAS# Delay tRRD: Auto=5
Row Refresch Cycle Time tRFC: Auto=88 90
Write Recovery Time tWR: Auto
Read to Precharge Time tRTP: Auto=5 7
2nd Information: ........
Read to Write Delay (S/D) tRTW: Auto=8 9
Write to Read Delay (S): Auto=5 6
Write to Read Delay (D): Auto=6 7
Read to Read Delay (S): Auto=4 5
Read to Read Delay (D): Auto=7 8
Write to Write Delay (S): Auto=4 5
Write to Write Delay (D): Auto=7 8
3rd Information: .......
Write to PRE Delay: Auto
Read to Pre Delay: Auto
Pre to Pre delay: Auto
All Pre to Act Delay: Auto
All Pre to Ref Delay: Motorrad (meine natürlich Auto )
DRAM Static Read Control: Disabled (Auto = FSB1600 instabil)
DRAM Dyn. Write Control: Disabled (Auto = FSB1600 instabil)
DRAM Read Training: Disabled
DRAM Write Training: Disabled
Mem. OC Charger: Enabled
AI Clock Twister: Auto Moderat
AI Transaction Booster tRD: Auto=8-10 Manual 10
CPU Voltage (VCore): 1.28750 1.27500 (testen)
CPU GTL Reference: 0.667V (testen)
CPU PLL Voltage: 1.50 (1.52)
FSB Term. Volt. (VTT): 1.28 1.24 (testen)
DRAM Voltage: 1,60 (laut Info auf RAM-Riegel)
NB Voltage (VNB): 1.28 1.30 (testen)
SB Voltage: 1.10
PCIE SATA Voltage: 1,50

Load-Line Calibration: Disabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto (ab 450FSB 400/500sp delay stabiler?)
NB Clock Skew: Auto (ab 450FSB 300/400sp delay stabiler?)
CPU Margin Enhancement: Performance mode (für Quad cores / testen)



Falls ihr Tipps für mich habt wäre ich sehr dankbar!
  Mit Zitat antworten