zum thema bios reset meint dein handbuch auf seite 29 von 96 (englische version):
Zitat:
19) CLR_CMOS (Clearing CMOS Jumper)
Use this jumper to clear the CMOS values (e.g. date information and B
reset the CMOS values to factory defaults. To clear the CMOS values, p
two pins to temporarily short the two pins or use a metal object like a scr
pins for a few seconds.
http://www.tweakpc.de/forum/members/...8-untitled.png
Open: Normal
Short: Clear CMOS Values
• Always turn off your computer and unplug the power cord from the power outlet before
clearing the CMOS values.
• After clearing the CMOS values and before turning on your computer, be sure to remove
the jumper cap from the jumper. Failure to do so may cause damage to the motherboard.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized
Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for
BIOS configurations).
|
das sit dann ein richtiger reset, nicht nur im bios selbst die "einstellungen wiederherstellen", so hab ich das nun verstanden.