das finde ich bei AMD:
Builders Guide for Desktop/Tower Systems 26003A — May 2002
Power Consumption Examples of Output Load Ratings
Table 1 lists the target output ratings for the 300 W ATX-12V power supplies that are often used in AMD Athlon XP and AMD Duron processor-based systems.
Table 1. DC Output Characteristics 300 W
Voltage___________Minimum_______Maximum________Pea k
_________________Continuous_____Continuous
+3,3 V___________0,3 A__________28,0 A
+5 V____________0,1 A___________30,0 A
+12 V___________0,0 A___________15,0 A___________18 A
-12 V____________0,0 A____________0,8 A
+5 V VSB_________0,1 A____________2,0 A 2,5 A
-5 V______________0,0 A____________0,3 A
Notes:
1. Maximum continuous total DC output power should not exceed 300 W.
2. Maximum continuous combined load on +3.3 V and +5 V outputs should
not exceed 80 W.
3. Maximum peak total DC output power should not exceed 437 W.
4. Peak power and current must be supported for a minimum of 15 seconds.
5. Maximum current for the 12 V outputs should be 15 A.
6. Peak current for the 12 V outputs should be 18 A.
7. The 5 VSB is only utilized when the system is in S3 (Suspend) mode.
Therefore, do not add this load to the total load of the power supply.
Nur ergibt dies einen ganz anderen Sinn als du hier darstellst! |