BIos Tuning? PCi Fix? Intel845e - Beitrag #10 - Post 486421 - Computer Hardware Forum - TweakPC -

Braintester · 10.06.2007, 15:20

wie geht das einen Ganzen Pfad angeben?

Egal was ich angebe: "file not found"

=:

1. Download the correct xxxxx.ZIP file and extract it. It may include a BIOS binary file xxxxx.BIN and a README file. Please read the README file carefully.
2. Download the AWDFLASH.EXE file from top of every Bios page.
3. Prepare a DOS 6.2x bootable disk (or windows 95/98 bootable disk) and don't include any AUTOEXEC.BAT and CONFIG.SYS file, then save the above files (AWDFLASH.EXE and xxxxx.BIN) to this diskette.
4. Enter BIOS setup and record any setting that you have changed before, then Load Setup Default to resume the default setting. Set "Boot Sequence" to "A, C, SCSI" in BIOS FEATURE SETUP, and disable the "System BIOS Cacheable" in CHIPSET FEATURE SETUP. You must record all BIOS settings especially PCI IRQ settings also serial & parallel port settings etc.. Finally save and exit BIOS setup.
5. Turn the system off and then turn the system on. Let the system boot up from the prepared diskette, type the command at the DOS prompt as following:

[FONT=&quot] A:\>AWDFALSH xxxxx.BIN <enter>
:=[/FONT]

10.06.2007, 15:20	#10 (permalink)
Braintester Hardware Killer Registriert seit: 12.05.2007 Beiträge: 822	AW: BIos Tuning? PCi Fix? Intel845e wie geht das einen Ganzen Pfad angeben? Egal was ich angebe: "file not found" =: Download the correct xxxxx.ZIP file and extract it. It may include a BIOS binary file xxxxx.BIN and a README file. Please read the README file carefully. Download the AWDFLASH.EXE file from top of every Bios page. Prepare a DOS 6.2x bootable disk (or windows 95/98 bootable disk) and don't include any AUTOEXEC.BAT and CONFIG.SYS file, then save the above files (AWDFLASH.EXE and xxxxx.BIN) to this diskette. Enter BIOS setup and record any setting that you have changed before, then Load Setup Default to resume the default setting. Set "Boot Sequence" to "A, C, SCSI" in BIOS FEATURE SETUP, and disable the "System BIOS Cacheable" in CHIPSET FEATURE SETUP. You must record all BIOS settings especially PCI IRQ settings also serial & parallel port settings etc.. Finally save and exit BIOS setup. Turn the system off and then turn the system on. Let the system boot up from the prepared diskette, type the command at the DOS prompt as following: [FONT=&quot] A:\>AWDFALSH xxxxx.BIN <enter> :=[/FONT]
	__________________________________________________ Siggi, so heißt die Signatur! <-- und die Putzt nicht nur \| http://sig.sysprofile.de/gfx/sysp-32133.gif