Moin zusammen,
hab mir eine Samsung HM250JI 2,5 Zoll gekauft. Seit ich die Platte in meinem Laptop habe höre ich Klackgeräusche (kommt wohl vom parken der Leseköpfe). Hab mit smartmontools diese Werte ausgelesen. Achtet mal auf die Power_on_hours und die Load_Cycle_Counts ist das normal?
Code:
C:\Dokumente und Einstellungen\Micky>smartctl -A hda
smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen
Home page is smartmontools Home Page (last updated $Date: 2007/10/26 21:49:03 $)
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always -
0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always -
2625
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always -
3
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always -
0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always -
0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline -
0
9 Power_On_Hours 0x0032 252 252 000 Old_age Always -
6
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always -
0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always -
3
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always -
138
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always -
2
194 Temperature_Celsius 0x0022 112 103 000 Old_age Always -
42 (Lifetime Min/Max 24/45)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always -
96
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always -
0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always -
0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline -
0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always -
0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always -
0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always -
0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always -
16
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always -
157 Bei der Platte die ich vor zwei Wochen gekauft hatte, war die gleiche, war der Load_Cycle_Count bei 1184 und das nach ca. 30 Stunden Betriebszeit. Ist das normal und für die Platte auch gesund?? Für Eure Hilfe im voraus schon mal vielen Dank