Zitat:
|
Zitat von niwa2 also ich habe das mit der batterie gestern noch mal probiert und es hat nicht geholfen. also werde ich das board jetzt zum vierten mal zurück schicken. langsam kotzt mich das an. 
mal sehen vielleicht hole ich mir ja das chaintech board |
und hab nochmal was gefunden:
Q. I flashed with the wrong file. Or my flash was incomplete. Is there any way to recover?
A. If your floppy drive seeks on power up and then stops after a short period of time, you may have a chance to recover. The following information was obtained from Wim's Bios
http://www.wimsbios.com/ FAQ's. Corrections on AWARD Bios by Terry McGuire.
Award: The boot-block BIOS will execute an AUTOEXEC.BAT file on a bootable diskette. Copy an Award flasher & the correct BIOS *.bin file on the floppy and execute it automatically by putting AWDFLASH *.bin /sn /py /cc /r in the AUTOEXEC.BAT file. The * would be the correct bios .bin file and there must be spaces between the slash marks. Put it in the floppy and turn on the computer when the floppy seeks it will load the correct bios and reboot by itself. When it finishes you have to remove the floppy and enter the CMOS SETUP and modify the CMOS for your configuration.
hoffe du kannst englisch
cu