das hab ich von dem leadtek support bekommen :
Please un-check "MSN messenger" setting in the "Internet" selection of
Norton antivirus
Please install the latest service packs for your computer.
Please install the latest Directx9
http://www.microsoft.com/downloads/details.aspx?FamilyId=0A9B6820-BFBB-4799-
9908-D418CDEAC197&displaylang=en for
Install the latest drivers for youre mainboard
VIA chipset
http://www.viatech.com
AMD chipset
http://www.amd.com
ALI chipset
http://www.ali.com.tw
SIS chipset
http://www.sis.com.tw
Intel chipset
http://support.intel.com/support/chipsets
Install the latest drivers for your soundcard and videocard
download the latest driver for your DV card
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=67
download the latest driver for youre PVR card
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=96
download the latest driver for your DELUXE /FM /RM card
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=63
download the latest driver for your EXPERT card
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=60
download the latest driver for your TV USB
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=62
download the latest software for your card
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=66
For drivers for other operating systems then XP go to
www.leadtek.com.tw
Deinstall all current winfast programs and drivers on your system.
go to start run
type msconfig
go to the startup tab
uncheck everything for now
reboot/shutdown
It Could be IRQ confliction problem. Please rearrange your TV2000 XP into
another PCI slot, then set the IRQ value of the PCI slot ( which TV2000 XP
plug in ) in the CMOS setting and make sure it does not shared with other
devices.
A common problem with TV-Cards is a conflict between the TV-Card and other
PCI devices. These are often surmountable by simply swapping the cards
around between PCI slots. As a general rule of thumb I try putting the
TV-Card in the PCI slot next to the Graphics card (AGP or PCI) but this can
be hit and miss. I've found that a TV-Card will work in one slot but not
another.
Use device manager to ensure that you don't have any existing IRQ conflicts
and attempt to free up an IRQ by disabling any unused hardware.
Install the driver first then the winfast pvr software
Use the codec pack from
http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm
Please set youre winfast workarea to a different drive or partition
we suggest you to change the video quality setting as "Normal quality" or
"Better quality". Please press right button of your mouse on the Video
display Window and reset the Video Quality.
----------------------------------------------------------------------------
--------------------
Did you connect the audio cable from your tv-cards line-out to the line-in
of youre soundcard. Did you also set that line on to the audio recording
line of winPVR.
The audio control line is the line you can control with youre remote if the
Winfast wizard is loaded
---
----- Original Message -----
From: <
--------
To: <
support@leadtek.nl>
Sent: Friday, January 21, 2005 2:58 PM
Subject: Osf-vga:My TV card does not work.
>
>
> Message sent from ip: 84.57.21.31
> On: Friday 21st of January 2005 02:58:48 PM
> Country: de
>
> Browser: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
>
> =======================================
>
> Name: Mr. xxxxxxxx
> Tel:
> Email: ---->
> Motherbord: K7SOM+ 7.5C
> Chipset: SIS 962
> Processor: AMD Duron 1200 MHZ
> Memmory: 655 MB
> OS: Windows XP
>
> Product: Win Fast TV 2000 XP RM REV A
> Serial: L 4080176074
>
> Question: Hello,
> I have a problem with my TV card listed above.
> When i want to install its driver i get this :
> Please wait ...
> Error: Not Supported! - 261214221
>
> What can i do ? I am freom Germany anhd have buyed this Card 1 Week ago.
> Yours cincerly
> Stefan Altheimer
>
> =======================================
>
>
>
tv-karte 
Und eine Pinnacle kaufen (Deutscher Hersteller) und super Support 
Linear-Darstellung
