TweakPC

Zurück   Computer Hardware Forum - TweakPC > Hardware > Overclocking - Übertakten
Registrieren Hilfe Community Downloads

Antwort
 
LinkBack Themen-Optionen Ansicht
Alt 09.08.2003, 14:45   #1 (permalink)
Zyrano
Gast
 

Beiträge: n/a

Standard STEPPINGS -----> (fast) alles erklärt

hallo.....


wäre vielleicht ganz sinnvoll vor diesen post ein "wichtig" zu setzen.

(leider nur auf englisch (sollte aber ja für die meisten kein problem sein)





Which Codes Mean What
To make this easy, what you need to know is listed by processor speed.

The OPN information is printed somewhere on every AMD CPU. For all Palominos, if you're looking at one, the OPN is the first code printed on the core of the CPU located in the middle of the processor. For all Thoroughbreds, the OPN the first code printed on the black area on one edge of the CPU.

This information is based on current AMD datasheets. These are subject to change, but AMD usually doesn't put new processors out before changing the datasheets.

For low-speed (i.e sub-2400+) Athlon XPs, there are two critical indicators in the OPN.

AX1700DMT3C: Voltage
AX1700DMT3C: Maximum temperature

The following codes mean the following:

Voltage

L: 1.50V
U: 1.60V
K: 1.65V
M: 1.75V

All Palominos have default voltage of 1.75V, so all Palominos have voltage code of "M." TBredAs have a default range of 1.5-1.65V. TBredBs have a default range of 1.6V-1.65V.

Maximum Temperature

T: 90C
V: 85C

All AMD processors with a rating less than 2200+ have a maximum temperature of 90C, so they're all "Ts." Anything above that has a max temp of 85C, so they're all "Vs."

Two Kinds of TBredBs

There are high-end and low-end TBredBs. They aren't all the same. The high-end ones on average perform several hundred MHz better than the low-end ones.

You can identify which type of TBredB it is by looking at code that begins the second line of coding on the processor. If you see a code like "AIUHB" that begins with the letter "A," that's a high-end TBredB.

If you see a code like "JIUCB" that begins with the letter "J," that's a low-end TBredB.

Here's how these codes translate in real life with real chips:

1700+

Palominos: If the website you're ordering from shows an order code of AX1700DMT3C, that's a Palomino.

TBredA: If the website you're ordering from shows an order code of AXDA1700DLT3C, that's a Thoroughbred A.

TBredB: If the website you're ordering from shows an order code of AXDA1700DUT3C, that's a Thoroughbred B.

If you see a code like "AIUHB" that begins with the letter "A" on the second line of the processor codes, that's a high-end TBredB.

If you see a code like "JIUCB" that begins with the letter "J" on the second line of the processor codes, that's a low-end TBredB.

As of now (1/15/03), all TBredBs sold at this speed are low-end "J" TBredBs.

1800+

Palominos: If the website you're ordering from shows an order code of AX1800DMT3C, that's a Palomino.

TBredA: If the website you're ordering from shows an order code of AXDA1800DLT3C, that's a Thoroughbred A.

TBredB: If the website you're ordering from shows an order code of AXDA1800DUT3C, that's a Thoroughbred B.

If you see a code like "AIUHB" that begins with the letter "A" on the second line of the processor codes, that's a high-end TBredB.

If you see a code like "JIUCB" that begins with the letter "J" on the second line of the processor codes, that's a low-end TBredB.

As of now (1/15/03), all TBredBs sold at this speed are low-end "J" TBredBs.

1900+

Palominos: If the website you're ordering from shows an order code of AX1900DMT3C, that's a Palomino.

TBredA: If the website you're ordering from shows an order code of AXDA1900DLT3C, that's a Thoroughbred A.

TBredB: If the website you're ordering from shows an order code of AXDA1900DUT3C, that would be a Thoroughbred B.

If you see a code like "AIUHB" that begins with the letter "A" on the second line of the processor codes, that's a high-end TBredB.

If you see a code like "JIUCB" that begins with the letter "J" on the second line of the processor codes, that's a low-end TBredB.

However, AMD's datasheets do not currently show a 1900+ TBredB, and as of now (1/15/03), there have been no sightings of any. Since both the 1800+ and 2000+ TBredBs have a default voltage of 1.60V ("U"); it's very safe to say any 1900+ TBredB will also.

2000+

Palominos: If the website you're ordering from shows an order code of AX2000DMT3C, that's a Palomino.

TBredA: If the website you're ordering from shows an order code of AXDA2000DKT3C, that's a Thoroughbred A.

TBredA/B: If the website you're ordering from shows an order code of AXDA2000DUT3C, that could be either a Thoroughbred A or Thoroughbred B. The only way to distinguish between the two is by the stepping code.

All TBredAs have a stepping code which ends in "A," like "AIUGA." All TBredBs have a stepping code which ends in "B," like "AIUGB."

There's two listed TBredA types in the AMD techdoc. One uses 1.6V, the other uses 1.65V. The TBredB is solely 1.6V.

If you've determined a CPU is a TBredB, if you see a code like "AIUHB" that begins with the letter "A" on the second line of the processor codes, that's a high-end TBredB.

If you see a code like "JIUCB" that begins with the letter "J" on the second line of the processor codes, that's a low-end TBredB.

As of now (1/15/03), there have no sighting of TBredBs, and only one sighting of a TBredA at this speed.

2100+

Palominos: If the website you're ordering from shows an order code of AX2100DMT3C, that's a Palomino.

TBredA/B: If the website you're ordering from shows an order code of AXDA2000DUT3C, that could be either a Thoroughbred A or Thoroughbred B.

All TBredAs have a stepping code which ends in "A," like "AIUGA." All TBredBs have a stepping code which ends in "B," like "AIUGB."

If you see a code like "AIUHB" that begins with the letter "A" on the second line of the processor codes, that's a high-end TBredB.

If you see a code like "JIUCB" that begins with the letter "J" on the second line of the processor codes, that's a low-end TBredB.

As of now (1/15/03), the only sighting of 2100+ TBreds have been TBredsBs sold by Newegg the last few days, and so far, they have all been high-end TBredBs.

2200+

TBredA: If the website you're ordering from shows an order code of AXDA2200DKV3C, that's a Thoroughbred A.

TBredB: If the website you're ordering from shows an order code of AXDA2200DUV3C, that's a Thoroughbred B.

If you see a code like "AIUHB" that begins with the letter "A" on the second line of the processor codes, that's a high-end TBredB.

If you see a code like "JIUCB" that begins with the letter "J" on the second line of the processor codes, that's a low-end TBredB.

2400+

Sorry, no exciting choices here (yet). They're all TBredBs, and they'll have an order code of AXDA2400DKV3C.

Yes, the DKV part is the same as for the 2200+. That's because a TBredA runs at 1.65V (that's what the "K" stands for) at 2200+. A TBredB runs at 1.6V (that's what the "U" stands for) at 2200+ and 1.65V at 2400+ and above.

As of now (1/15/03), all sightings of the 2400+ and faster CPUs have been high-end TBredBs.

2600+

These are all TBredBs, too, but just in case "which one I am getting" is getting old, the 2600+ gives you a new, different challenge: What Speed Am I Getting? There will be two 2600+s, but they'll run at different speeds. Since the 333MHz bus helps performance, AMD figured (correctly) that a CPU running at a slightly lower speed and higher bus was the same as a CPU running at a higher speed and a lower bus.

The 2600+, 266MHz version, will run at 2133MHz.

The 2600+, 333MHz version, will run at 2083MHz.

We'll no doubt see more situations like this as the number of 333MHz processors expands.

The way you tell these apart by OPN is that the 266MHz processors will always have an OPN that ends in "C," while the 333MHz processors will always have an OPN that ends in "D."
  Mit Zitat antworten
Alt 22.08.2003, 14:43   #2 (permalink)
Extrem Performer
 
Benutzerbild von Realive
 

Registriert seit: 04.06.2002
Beiträge: 1.250

Realive wird schon bald berühmt werden

Standard

kopieren und einfügen kann ja jeder !!

In der letzten PC Games Hardware war auch ein detailierter Bericht über die Beschriftung und Speziell auch über die Steppings. Dort stand drinn das die Steppings gar nicht so wichtig für die Leistung der CPU sind bis auf eine ausnahme und das waren die JUIHD (glaube ich zumindest das es dieses war) Modell. Ansonsten sagt das stepping gar nichts über das übertaktungspotenzial der CPU aus.
Realive ist offline   Mit Zitat antworten
Alt 22.09.2003, 20:01   #3 (permalink)
Gast
 

Registriert seit: 22.01.2002
Beiträge: 20.356

Gast befindet sich auf einem aufstrebenden Ast

Standard

von der PC Games Hardware halte ich nicht viel...

...nur weil die jetzt schreiben, Steppings ist Schwachsinn, soll sich die Denkweise tausender Leute ändern?

Irgendwie passt das nicht.
Gast ist offline   Mit Zitat antworten
Alt 22.09.2003, 20:38   #4 (permalink)
Extrem Tweaker
 
Benutzerbild von Shader
 

Registriert seit: 24.07.2003
Beiträge: 1.951

Shader wird schon bald berühmt werden

Standard

zumindest besser als Computer Bild oder?
die haben schon mehr Ahnung als Gamestar o. Computer Bild das müsst ihr zugeben, aber ich bin bei einer sache mit PCGames Hardware überhaupt nicht zufrieden ----> die verwenden solch ****** Rohlinge
50% der rohlinge kann mein Laufwerk lesen , jedoch dauert dies 5min bis mein LW es geschafft hat und das liest mit voller Geschwindigkeit und volle Dröhnung, bei den anderen 50% kann sie überhaupt net lesen ---> auch ein umtausch hat kaum geholfen, das ärgert mich so sehr das sie solch *zensiert* Rohlinge nehmen und das als Hardware Zeitschrift !!! würde es eine ohne CD geben würde ichm ir die holen denn die mit CD ist reine Geldverschwendung
auch das Laufwerk Reinigen hilft so gut wie gar net
jetzt kann man sagen, schlechtes LW, doch das ist es nicht, es ist leise und hat NIE solch probleme gehabt außer bei PC Games Hardware
allmählich fängt das auch bei den Gamestar DVDs an, sparn die jetzt an Rohling Qulität oder wie schaut das aus?
das ärgert einen totall
Shader ist offline   Mit Zitat antworten
Alt 23.09.2003, 10:06   #5 (permalink)
Extrem Tweaker
 

Registriert seit: 23.04.2002
Beiträge: 1.544

StefanW wird schon bald berühmt werden

Standard

Gut wir sind hier bei AMD, doch ich bräuchte was von Intel P4 Stepping.

Das von AMD wußte ich bereits schon. Leider haben sie die Waferposition nicht erklärt.
StefanW ist offline   Mit Zitat antworten
Alt 09.02.2004, 09:25   #6 (permalink)
Neuling
 

Registriert seit: 09.02.2004
Beiträge: 1

Smoka befindet sich auf einem aufstrebenden Ast

Standard

also mal ganz im ernst... PCGames Hardware is ja nu wirklich net so pralle!!! kauf dir liber mal die ct´oder sowas!!! und n kumpel von mir hat nen stepping und die sind wesentlich besser, da manda den multi frei wählen kann, was man bei den normalen net machen kann!!! er hat seinen 1700+ auf nen 3400+ getaktet und das finde ich schon ziemlich gOil vor allem, weil sein kühler dabei noch im silent mode luft!!! also wäre noch mehr möglich!!
Smoka ist offline   Mit Zitat antworten
Alt 09.02.2004, 09:29   #7 (permalink)
Polsterwaffenkampfsportle r
 
Benutzerbild von tele
 

Registriert seit: 29.10.2003
Beiträge: 14.561

tele hat eine strahlende Zukunft
tele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunft

Standard

TBreds auf NF2 sind freigeschaltet das ist nicht Stepping abhängig
tele ist offline   Mit Zitat antworten
Alt 09.02.2004, 11:04   #8 (permalink)
Extrem Tweaker
 
Benutzerbild von xtrm2k
 

Registriert seit: 11.11.2003
Beiträge: 2.288

xtrm2k sorgt für eine eindrucksvolle Atmosphärextrm2k sorgt für eine eindrucksvolle Atmosphärextrm2k sorgt für eine eindrucksvolle Atmosphäre

Standard

Zitat:
Zitat von telepornos
TBreds auf NF2 sind freigeschaltet das ist nicht Stepping abhängig

Und wieso hab ich wenn ich den Multi von 12.5 auf 13 umstelle nach dem Booten nur noch 6,5x FSB?


Achja hab das Asus A7N8X -E- Deluxe...
xtrm2k ist offline   Mit Zitat antworten
Alt 09.02.2004, 11:13   #9 (permalink)
Polsterwaffenkampfsportle r
 
Benutzerbild von tele
 

Registriert seit: 29.10.2003
Beiträge: 14.561

tele hat eine strahlende Zukunft
tele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunft

Standard

weil irgendwie 12,5 der max tbred multi ist? alles drunter kann ich auch verstellen
tele ist offline   Mit Zitat antworten
Alt 09.02.2004, 11:30   #10 (permalink)
Extrem Tweaker
 
Benutzerbild von xtrm2k
 

Registriert seit: 11.11.2003
Beiträge: 2.288

xtrm2k sorgt für eine eindrucksvolle Atmosphärextrm2k sorgt für eine eindrucksvolle Atmosphärextrm2k sorgt für eine eindrucksvolle Atmosphäre

Standard

Zitat:
Zitat von telepornos
weil irgendwie 12,5 der max tbred multi ist? alles drunter kann ich auch verstellen

Und mitm Schlaufentrick kann ich den "unlocken" damit ich den Multi höher stellen kann? Oder geht nur Multi "12,5 >" und per FSB OC´en?
xtrm2k ist offline   Mit Zitat antworten
Alt 09.02.2004, 16:16   #11 (permalink)
PC Schrauber
 

Registriert seit: 09.02.2004
Beiträge: 155

DAS_Ei befindet sich auf einem aufstrebenden Ast

Standard

Zitat:
Zitat von telepornos
TBreds auf NF2 sind freigeschaltet das ist nicht Stepping abhängig
stimmt soweit! Das Stepping gibt nur an wie weit man einen Prozessor übertakten kann zum Bleistift das JIUHB Stepping beim XP1700/1800

mit dem Schlaufentrick kannst du nur alle Multis unterhalb 12,5 freischalten! Das benötigt man bei den grossen XP's! (Das geht aber nur bei Tbreds mit B-Core)

Wenn du über 12,5 Multi kommen willst brauchst du ein Mobo mit 5FBIT Verteiler (Abit Nf7-S und Asus A7n8x) oder du musst bestimmte Brücken auf deinem Prozzi miteinander verbinden!

PS: und ich oute mich als 3D Faces Avatar Mensch...so ne **** *******e wo/wie kann ich nen Avatar von meiner Platte hochladen (auf dieser Saftseite )
PPS: und was soll das mit dem ZENSIERT, bin ich den USA???
PPPS: es soll heissen so eine verbockte Fäkalie
PPPPS: hehe ausgetrickst
DAS_Ei ist offline   Mit Zitat antworten
Alt 09.02.2004, 17:04   #12 (permalink)
Polsterwaffenkampfsportle r
 
Benutzerbild von tele
 

Registriert seit: 29.10.2003
Beiträge: 14.561

tele hat eine strahlende Zukunft
tele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunft

Standard

indem du den auf DEINE Seite hochlädst und dann verlinkst
tele ist offline   Mit Zitat antworten
Alt 09.02.2004, 17:06   #13 (permalink)
PC Schrauber
 

Registriert seit: 09.02.2004
Beiträge: 155

DAS_Ei befindet sich auf einem aufstrebenden Ast

Standard

welche Seite

Muss mir wohl für dieses Forum erst eine anlegen oder was? nenene
DAS_Ei ist offline   Mit Zitat antworten
Alt 09.02.2004, 17:23   #14 (permalink)
Polsterwaffenkampfsportle r
 
Benutzerbild von tele
 

Registriert seit: 29.10.2003
Beiträge: 14.561

tele hat eine strahlende Zukunft
tele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunfttele hat eine strahlende Zukunft

Standard

naja mussts schon auf nem privaten webspace lagern oder aus nem anderen forum, hauptsache im Inet, ich habs z.b. aus nem anderen forum, wo ich hochladen kann *servermissbrauch*
tele ist offline   Mit Zitat antworten
Alt 22.02.2004, 19:49   #15 (permalink)
Taschenrechner
 

Registriert seit: 31.12.2003
Beiträge: 50

Thorin II befindet sich auf einem aufstrebenden Ast

Standard

Hi, ich hab jetzt einmal das AIDA 32 über meinen Compi gehetzt.
Da steht jetzt unter CPU-Stepping "A2". Welches ist damit gemeint???
Gibt ja bei dem so viele...
Der Prozessor ist ein Barton 2500+. Danke schonmal im Vorraus.
(will PC noch nicht aufschrauben, erst wenn der Kühler da ist )
Thorin II ist offline   Mit Zitat antworten
Alt 29.02.2004, 00:05   #16 (permalink)
PC Schrauber
 

Registriert seit: 21.02.2004
Beiträge: 134

Notmynick befindet sich auf einem aufstrebenden Ast

Standard

T-Bred nicht über 12.5????

Ich habe einen AMD2200+/T-Bred und schon Multis jenseit von 14 eingestellt. Ihr müsst beim ASUS nur die wählen die alleine stehen nicht wie 9x/14,5 da wählt das ASUS dann je nach CPU den pass aus!
Notmynick ist offline   Mit Zitat antworten
Alt 04.03.2004, 11:30   #17 (permalink)
Zyrano
Gast
 

Beiträge: n/a

Standard

Oh Gott diese Inkompetenz

1-Nicht alle T-bred sind auf einem NF2 Board freigeschaltet nur die alten
2-Multi über 12,5 geht
3-Stepping sagt nicht wie hoch man übertakten kann (gibt höchstens nen kleinen Wink)


Amen
  Mit Zitat antworten
Alt 30.09.2004, 10:57   #18 (permalink)
Tweaker
 
Benutzerbild von Nargaroth
 

Registriert seit: 06.09.2004
Beiträge: 414

Nargaroth wird schon bald berühmt werden

Standard

Irgendwie reden hier alle um den heisen Brei herum !!!!!
Frage ! Was zum Teufel ist ein 5FBIT Verteiler ???
Ich hab selbst einen XP1700+ DUT Ju..... Steping, aber alles was über 12,5 beim Multiplaktor geht wird wie gewohnt geteilt.. Mit dem Drathmod sollte es auf jedenfall funzen, egal was ich für ein Board habe !! Also ein Socket A sollte es schon sein.. *g* Aber ich hab das mal bei meiner CPU probiert und hab festgestellt das man dazu verdammt kleine Finger brauch.
http://www.ocinside.de/go_d.html?/ht..._pinmod_d.html <-- fall es mal noch jemand ausprobieren will..

PS. Und es geht auch mit kleineren T-Breds (T-Bred A) !!!!
Nargaroth ist offline   Mit Zitat antworten
Alt 30.09.2004, 14:32   #19 (permalink)
Tweaker
 

Registriert seit: 03.07.2004
Beiträge: 635

Fr33d00m befindet sich auf einem aufstrebenden Ast

Standard

kleiner typ: statt den draht am prozessor zum legen, sollte man in zu nem "U" formen udn dannind den sockel reinstecken, wo er hin muss...
mfg
Fr33d00m ist offline   Mit Zitat antworten
Alt 01.10.2004, 13:09   #20 (permalink)
Tweaker
 
Benutzerbild von Nargaroth
 

Registriert seit: 06.09.2004
Beiträge: 414

Nargaroth wird schon bald berühmt werden

Standard

Na das ist doch endlich mal ein wertvoller TIP !!! Gratulation, seit ich hier in dem Forum bin bist so ziehmlich der erst der mir irgendwie helfen konnte.. *lol* THX, werd ich mal testen...
Nargaroth ist offline   Mit Zitat antworten
Alt 03.10.2004, 11:13   #21 (permalink)
Tweaker
 

Registriert seit: 03.07.2004
Beiträge: 635

Fr33d00m befindet sich auf einem aufstrebenden Ast

Standard

Zitat:
Zitat von Nargaroth
Na das ist doch endlich mal ein wertvoller TIP !!! Gratulation, seit ich hier in dem Forum bin bist so ziehmlich der erst der mir irgendwie helfen konnte.. *lol* THX, werd ich mal testen...
mit ein bisschen überlegung wär wohl jeder drauf gekommen
aber der unterschied is halt, dass ich es als erster war und ihr net
mfg
Fr33d00m ist offline   Mit Zitat antworten
Antwort

Stichworte
>, erklärt, steppings


LinkBacks (?)
LinkBack to this Thread: https://www.tweakpc.de/forum/overclocking-uebertakten/10036-steppings-fast-alles-erklaert.html
Erstellt von For Type Datum
yahoremonila 82 post This thread Trackback 13.12.2007 20:01
Untitled document This thread Refback 01.12.2007 10:55
Untitled document This thread Refback 25.10.2007 21:14

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)
 

Forumregeln
Es ist dir nicht erlaubt, neue Themen zu verfassen.
Es ist dir nicht erlaubt, auf Beiträge zu antworten.
Es ist dir nicht erlaubt, Anhänge hochzuladen.
Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.

BB-Code ist an.
Smileys sind an.
[IMG] Code ist aus.
HTML-Code ist aus.
Trackbacks are an
Pingbacks are an
Refbacks are an


Ähnliche Themen
Thema Autor Forum Antworten Letzter Beitrag
[News] Botnetze erklärt TweakPC Newsbot News 1 28.07.2009 11:50
pc aufrüsten bzw fast alles neu stoffel78 Komplett-PCs, Konfigurationen 32 27.06.2009 22:02
Platte klackt aber alles(fast) ok. mit soundfile Desaster Festplatten und Datenspeicher 8 28.03.2007 13:48


Alle Zeitangaben in WEZ +1. Es ist jetzt 04:46 Uhr.






Powered by vBulletin® Version 3.8.10 (Deutsch)
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
SEO by vBSEO 3.5.2 ©2010, Crawlability, Inc.
Impressum, Datenschutz Copyright © 1999-2015 TweakPC, Alle Rechte vorbehalten, all rights reserved